BMW Inspection 2

Return to Services Main Page

BMW Inspection 2

The Inspection 2 Service is the larger of the two Inspection services and is basically a bumper to bumper inspection of the vehicle. The following is a list of the items we inspect and replace during this service.

Undercarriage

  • Change engine oil and filter while engine is at normal operation temperature.
  • Check transmission for leaks.
  • Check rear axle for leaks.
  • Visually check fuel tank, lines, and connections for leaks.
  • Check condition, position, and mounting of exhaust system. Examine for leaks.
  • Check power steering system for leaks.
  • Check overall thickness of front and rear disc brake pads.
  • Examine brake disc surfaces.
  • Clean brake pad contact points in calipers.
  • Grease wheel center hubs.
  • Check steering for absence of play, condition of suspension track rods, front axle joints, steering linkage, and joint disc.
  • Check front control arm bushing for wear.
  • Check brake and clutch system connectors and lines for leaks, damage, and incorrect positioning.
  • Check for free movement of the parking brake cables. Adjust parking brake if necessary.
  • Check all tire pressures (including spare). Correct if necessary.
  • Check condition of tires (outer surfaces (left/right)), tread wear and pattern. In case of uneven tread wear readjust wheel alignment if required.
  • Check thickness of parking brake linings.
  • Half-shafts – check for leaks at flexible boots.
  • Inspect entire body according to terms of rust prevention limited warranty.

Engine Compartment

  • Read out diagnostic system.
  • Check engine cooling system/heater hose connections for leaks.
  • Check coolant level and antifreeze protection level. Add coolant if necessary.
  • Check level of brake and clutch fluid in reservoir. Add fluid if required.
  • Check windshield washer fluid level and antifreeze protection. Fill up and/or correct if necessary.
  • Check air conditioner for operation.
  • Reset service indicator.
  • Replace spark plugs.
  • Replace intake air cleaner element (air filter).
  • Body/Electrical Equipment
  • Check battery electrolyte level and add distilled water if required.
  • Perform battery load test.
  • Check lighting system. (i.e. headlights, foglights, parking, backup, license plate, interior-including map reading lights, glove box, flashlight, illuminated makeup mirrors, luggage compartment lights)
  • Check instrument panel and dashboard illumination.
  • Check all warning/indicator lights, check control.
  • Check turn signals, hazard warning flashers, brake lights, horns, headlight dimmer/flasher switch.
  • Check wiper and washer system(s); wiper blades, washer jet positions.
  • Check condition and function of safety belts.
  • Oil hood, trunk/tailgate, and door hinges.
  • Grease hood, trunk/tailgate and door latches. Check operation of all latches.
  • Check central locking/double lock.
  • Replace microfilter or ACC cabin filter.
  • Check heater/air conditioner blower, rear window defogger.
  • Check rear view mirrors.
  • Visually examine the SRS airbag units for torn cover, obvious damage or attachment of decals, decorations, or accessories.

Final Inspection

  • Road test with check of brakes, suspension, steering, clutch/manual transmission or automatic transmission.